Complete set of wire mesh cable tray 65×60 mm
Would you like to place an order? You can order our products through any of our distribution partners or contact our sales department.
Find distributor
Complete set of wire mesh cable tray with dimensions 65×60 mm and a total length of 12 metres.
Complete set of wire mesh cable tray, consisting of four lengths of 3 metres (65×60 mm), manufactured from high-quality steel with EZ1000 surface treatment. Equipped with integrated couplings and including 10 roof supports.
RoofSupport Conduct
RoofSupport provides the optimal solution for organizing cabling on roofs in solar panel installations. RoofSupport is a combination of roof supports and wire trays. With the click-and-go system, the set is easy to install without the need for tools. The roof support does not need to be attached to the ground. Thanks to the design, the cables are positioned in the wire tray, mounted on a roof support, keeping them out of water.
Reduced CO₂ footprint
The wire mesh cable tray is manufactured from high-quality steel with EZ1000 surface treatment. The material offers excellent corrosion resistance and self-healing properties, making it suitable for use in extreme weather conditions. By using this material, the RoofSupport wire mesh cable tray contributes to a reduced CO₂ footprint.
Wind-Certified
The RoofBlock roof support, weighing 1 kg with a recommended spacing of 1.2 meters and the advised number of cables, provides sufficient ballast for RoofSupport to remain stable. The heavier RoofBlockXL, which weighs 3.5 kg, is resistant to hurricane forces at a spacing of 2 meters. The certifications obtained emphasize the quality attributes of these systems, which are installed across Europe. Conduct thus provides installers and end-users with the assurance that the systems supplied will perform, even in the heaviest storms. The roof support and wire tray have been tested in the Peutz wind tunnel.
Placement Advice
For a safe and stable installation of the RoofSupport system, we recommend placing the roof supports at regular intervals, depending on the type of roof support and the width of the wire tray. The standard RoofBlock is placed every 1.2 meters, while the heavier RoofBlockXL can be placed every 2 meters. Following this placement advice ensures optimal load-bearing capacity and a reliable installation.