FAQ

Frequently asked questions

General

Conduct supplies businesses through selected technical wholesalers, project suppliers and specialist PV distributors, including in the Netherlands, Belgium, France and Germany.

Yes. For an introduction and the conditions, contact sales@conduct.nl.

Almost all brands are compatible. Send us the make and model for advice or use the PVboxtool.

Conduct cites wind certification, corrosion testing and standards including NEN 1010, IEC 61439 and EN 13501-1. Check the documentation for the specific product.

Earthing provides a path for fault currents. Equipotential bonding reduces voltage differences between metal parts.

Earth and bond the metal components as required by the design and applicable local rules. In the Netherlands, Conduct references NEN 1010 and Scope 12 inspections. Conduct bonding kits are available.

PVshelter Mini, Angled Plus and Angled Compact. The new models are wind-certified and made of Magnelis® steel.

For commercial, public-sector or industrial installations, the Dutch FAQ notes that it is required unless a risk assessment establishes a very low risk. Check the applicable rules and the installation design in your market.

Conduct references IEC 62548:2016 and, in the Netherlands, NEN 1010. Clearly label strings, inverters and switches in accordance with the applicable requirements.

Conduct cites wind certification by peutz.nl/TNO, corrosion testing for Magnelis® steel and standards including NEN 1010, EN 13501-1 and IEC 61439-1. See the documents for the specific system.

Magnelis® is a steel coating containing 93.5% zinc, 3.5% aluminium and 3% magnesium, applied by continuous hot dipping. Compared with galvanised steel, it offers self-healing protection at cut edges and damage, a longer service life and less rust in salty air or ammonia exposure. The Dutch FAQ cites at least 25 years of protection, including in harsh conditions.

RoofSupport cable management

RoofSupport is a modular cable management system for residential and commercial PV installations. Its click connections speed up installation. It is wind-certified, made of corrosion-resistant Magnelis® steel and has a low CO₂ footprint. Order a complete kit under one part number or individual components. Read about the CO₂ footprint

Peutz wind tunnel testing assessed the system against TNO and Peutz guidelines for stability under extreme wind loads. View the wind certificate

The Dutch FAQ specifies RoofBlockXL for wire mesh trays 200 mm and wider, at up to 2 m spacing. For narrower trays, it specifies RoofBlock at up to 1.2 m. Follow the mounting instructions for your configuration. Read the mounting instructions (Dutch)

2 m, subject to the mounting instructions for the configuration.

The Dutch FAQ recommends it for wire mesh trays 200 mm wide or more.

Bonding kits reduce voltage differences between metal components, helping limit shock and disruption risks. The Dutch FAQ references NEN 1010:2020.

Yes. Request the correct, current drawing at info@conduct.nl.

Yes. RoofSupport wire mesh trays are compatible with PVshelter for tidy and secure cable routing.

The FAQ specifies them where DC cables cross a fire compartment. Conduct describes FireWrap as delaying fire for at least 60 minutes and helping limit its spread. Follow the fire protection design for the assembly.

Yes. The tray itself must not serve as the bonding conductor. Use approved bonding kits.

Use RoofSupport HOME (part number RSH3035-3M) for small installations. Since 1 April 2025, order reinforced connector 2/4915 separately.

The RoofSupport wire mesh range uses open trays to support ventilation and make inspection and installation easier.

Yes, for covers 100 mm wide and above for added security in high winds or on slopes. The 60 mm cover has integrated clips.

Efficient use of materials and lower transport needs help reduce the CO₂ footprint per project. Read about the CO₂ footprint

Factory-fitted connectors click together without tools. Conduct specifies equipotential continuity across the connections up to 100 m.

The stainless steel reinforced connector (part number 2/4915) is used for right-angle connections or to secure curved tray sections. It is recommended for additional mechanical loads or secure corner fixing.

Adjustable stainless steel bend connector 2/5093 links curved sections on curved roofs or where a wide cable tray bend is needed.

PVshelter inverter mounting systems

It offers excellent corrosion resistance, self-healing protection when damaged, a lower environmental impact and resistance to chlorides and ammonia.

Fire protection for inverter mounting frames, beneath and behind the inverters.

1700 mm long, 1220 mm wide, 19.5 mm high and 20.33 kg.

Back to Back:

  • PVS200319-19-NA Type 150: 83,5x78x115 cm (85 kg incl. ballast)
  • PVS200319-3 Type 200: 144x122x100 cm (190 kg incl. ballast)
  • PVS200319-7 Type 300HE: 179x172x150 cm (336 kg incl. ballast)
  • PVS200319-16 Type 300HE 219 cm: 219x172x162 cm (351 kg incl. ballast)

Wall Floor:

  • PVS200319-4 Type 100: 144x122x65 cm (117 kg incl. ballast)
  • PVS200319-8 Type 150HE: 179x172x75 cm (169 kg incl. ballast)
  • PVS200319-15 Type 150HE 219 cm: 219x172x75 cm (188 kg incl. ballast)

Wall:

  • PVS200319-5 Type 100: 130x108x47 cm (32 kg)
  • PVS200319-9 Type 150HE: 165x158x47 cm (47 kg)

Angled:

  • PVS200319-12 Type 130: 100x162x100 cm (78 kg)
  • PVS200319-12-PLUS Type 65 PLUS: 100x80x100 cm (61 kg)
  • PVS200319-17 Type 65 Compact: 100x87x100 cm (68 kg)

PVBOXshelter:

  • PVS200319-PVBOX: 80x40x67 cm (45 kg incl. ballast)

Select it based on mounting width and inverter power. Read the selection guide

They are supplied with the product and can also be downloaded from the documentation.

It keeps DC voltage outside the building, supports ventilation, improves fire and weather protection and makes maintenance easier.

Wall-mounted, floor-mounted and freestanding models are available. They are wind-certified and made of Magnelis® steel. See the technical datasheet

Back2Back is freestanding and supports mounting on both sides. Wall-Floor is installed against a wall or parapet, with mounting on one side.

Yes. All models are available unassembled and include mounting instructions.

The roof must have sufficient load-bearing capacity. If unsure, contact us.

Yes, provided the base is stable, level and load-bearing.

Angled: for inverters up to 130 cm. Angled Plus: room for a PVbox or AC switch next to the inverter. Angled Compact: for a PVbox or AC switch alone in a compact space.

Use a PVshelter spacer roof set such as PVS200319-TD200 for a 200 mm gap.

PVbox connection boxes

A generator connection box for connecting PV panels to the inverter and AC system, with surge protection.

For DC and AC connections, with options to integrate SPDs, fuses and load-break switches.

An alarm system that detects tampering, cable theft and faults and sends alerts.

When cables are cut, power is interrupted, the enclosure is opened or tampering is detected.

Four volt-free signalling contacts for connection to a BMS, siren or alarm receiving centre.

Input: 230 V AC, minimum 1.8 A. Output: 24 V DC, 2.5 A.

When the installation requires it. For the correct dimensions, contact us.

Solar cables

Even waterproof cables are tested under limited conditions. Prolonged immersion can cause water ingress and insulation faults.

Route positive and negative conductors in parallel and run the bonding conductors in the same tray.

It meets standards including EN 50618 and IEC 62930. In the Netherlands, it can be used in installations designed to NEN 1010 and assessed under Scope 12.

Yes. Conduct SolarCable is UV-resistant, halogen-free and rated from −40 °C to +90 °C. The Dutch FAQ cites AD8 for short-term moisture resistance.

PVtube roof penetrations

Airtight construction reduces heat loss, moisture problems and wood rot. Conduct PVtube provides an airtight roof penetration for DC cabling. In the Netherlands, Conduct references NPR 5310 and BENG. Read about BENG (Dutch)

Ø50 mm for standard solar cables and Ø63 mm for thicker or multiple cables. Both are suitable for airtight roof penetrations under Dutch BENG requirements and come with a mounting ring and sealing kit.

It reduces heat loss and moisture issues. For Dutch projects, Conduct offers PVtube as a solution in line with NPR and BENG requirements.

Can’t find the answer to your question?

Contact us